Product Engineer 1/2 (R&D Engineer 1/2)

What You Will DoThe Product Engineering group in PT-5 (Product Engineering & Product Support) consists of a multidisciplinary group of engineers and scientists that support plutonium programs (i.e., pit production, surveillance, research & development, and subcritical experiments) across the entire Pit Technologies (PT) Division. The primary role of product engineering is to provide configuration management to the suite of PT programmatic missions from development through production.This position will be filled at either the R&D Engineer 1 or R&D Engineer 2 level, depending on the skills of the selected candidate. Additional job responsibilities (outlined below) will be assigned if the candidate is hired at the higher level.R&D Engineer 1 ($92,300 - $151,000)Successful Level 1 candidates will perform the following duties and responsibilities:Serve as a contributing member of the R&D and Operations teams to address engineering challenges. Contribute at a fully functioning level to the research, design, testing, analysis, verification, and validation of engineering and technology solutions in support of R&D and Operations initiatives. Develop new methods, technologies, and analysis techniques for institutional programs. Ensure programmatic objectives through project management and engineering support to successfully complete milestones. Independently present specific aspects of engineering assignments at project meetings to coworkers and management personnel. Adapt to evolving R&D requirements while meeting safety, security, compliance, and schedule imperatives. Collaborate with multidisciplinary groups throughout the laboratory. Participate in professional development and mentorship opportunities to enhance your engineering career.R&D Engineer 2 ($101,700 - $168,200)Successful Level 2 candidates will perform the following duties and responsibilities in addition to what was outlined at the lower level:Lead the research, design, and testing of engineering and technology solutions in support of R&D initiatives. Apply broad and diversified knowledge of engineering principles to implement sound engineering practices to achieve organizational objectives. Review technical procedures to ensure work is executed safely and securely while meeting product requirements. Mentor junior product and process engineers.What You NeedMinimum Job Requirements:Engineering Expertise:For this position, you will need basic knowledge of professional engineering concepts, principles, practices, and procedures; demonstrated through experience researching, designing, testing, analyzing, verifying, and validating engineering solutions.Analytical Skills:Basic analytical thinking skills, as demonstrated by experience designing and executing experiments, including analyzing and interpreting data. This includes a commitment to high quality and timeliness of deliverables. Experience performing a broad range of complex engineering work, including experience designing a complete project, system, or component through courses or experience.Communication and Teamwork:The ability to work independently and with a team in high-intensity environments with coworkers representing a variety of technical backgrounds and the ability to express ideas clearly, and in ways that build understanding, respect, and trust, as demonstrated through presentations and publications.Additional Job Requirements for R&D Engineer 2:In addition to the requirements outlined above, qualification at the higher level requ i res:Engineering Expertise:Thorough knowledge of and experience in one or more of the following engineering disciplines: mechanical; materials science; chemical; metallurgical or other R&D engineering fields. Thorough knowledge of and experience in designing; planning; and executing research and development projects.Communication and Leadership:Excellent written communication skills are required. This includes the ability to recognize technical problems, analysis, and testing to generate suitable solutions and effectively document and communicate results. Will be asked to take on leadership roles and mentor other product and process engineers.Education/Experience at lower level : The position requires a bachelor's degree in engineering from an ABET accredited institution related to the occupation combined with 2 years of related experience. Candidates that meet the degree requirement, but do not meet the 2-year minimum experience requirement are encouraged to apply and may be considered for hire through an exception process.Education/Experience at higher level : The position requires a Bachelor's Degree in Engineering from an ABET-accredited institution and 4 years of related experience; or, an equivalent combination of education and experience directly related to the occupation.DOE Order 426.2: R equires a Bachelor of Science Degree in Engineering or a related science, 2 years of job-related experience, and 1 year of nuclear experience; this can be obtained through the 1-year onsite NET (New Employee Training) Academy.Desired Qualifications:Demonstrated knowledge or experience working in a manufacturing or production organization requiring implementation of defined manufacturing, testing, and quality requirements. Knowledge and experience with system and subsystem qualification testing and/or analysis. Demonstrated knowledge of the Conduct of Operations. Existing DOE "Q" clearance (or similar).

Interdisciplinary project experience with varied technical backgrounds within a group

Willingness to take initiative on new tasks or projects.

Design to manufacturing experience.

Technical writing consisting of project proposals, technical research, and summary presentations.

Materials Selection/Design

Project Management Techniques

Non-destructive evaluation techniques such as radiography

CMM (Coordinate Measuring Machines)

Microscopy/Image Analysis

Maintainability/Reliability Certification

Supply Chain Management/Experience

Essential Job Functions (can perform with or without reasonable accommodation): Ability to speak, ability to discriminate speech, ability to hear in a normal range (500 to 3000 htz), sitting, standing, walking, reading, vision, typing or keyboarding, lifting 5-10 pounds, carrying 5-10 pounds.Work Environment: Day-to-day activities take place in an office environment though candidates would need the ability to work near sources of ionizing and non-ionizing radiation and the ability to wear protective clothing as necessary.Work Location: The work location for this position is onsite and located in Los Alamos, NM. All work locations are at the discretion of management.Position commitment: Regular appointment employees are required to serve a period of continuous service in their current position in order to be eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the time required, they may only apply for Laboratory jobs with the documented approval of their Division Leader. The position commitment for this position is 1 year.Note to Applicants: Applicants must include a resume with a detailed cover letter that addresses all the minimum requirements of the position; any additional desired requirements should also be addressed.Where You Will WorkLocated in beautiful northern New Mexico, Los Alamos National Laboratory (LANL) is a multidisciplinary research institution engaged in strategic science on behalf of national security. Our generous benefits package includes:§ PPO or High Deductible medical insurance with the same large nationwide network§ Dental and vision insurance§ Free basic life and disability insurance§ Paid childbirth and parental leave§ Award-winning 401(k) (6% matching plus 3.5% annually)§ Learning opportunities and tuition assistance§ Flexible schedules and time off (PTO and holidays)§ Onsite gyms and wellness programs§ Extensive relocation packages (outside a 50 mile radius)Additional DetailsDirective 206.2 - Employment with Triad requires a favorable decision by NNSA indicating employee is suitable under NNSA Supplemental Directive 206.2 (https://directives.nnsa.doe.gov/supplemental-directive/sd-0206-0002) . Please note that this requirement applies only to citizens of the United States. Foreign nationals are subject to a similar requirement under DOE Order 142.3A.Clearance: Q (Position will be cleared to this level). Selected applicants will be subject to a background investigation conducted by or on behalf of the Federal Government, and must meet eligibility requirements for access to classified matter. This position requires a Q clearance. and obtaining such clearance requires US Citizenship except in extremely rare circumstances. Dependent upon the position, additional authorization to access classified information may be required, which may or may not be available to dual citizens. Receipt of a Q clearance and additional access authorization ultimately is a decision of the Federal Government and not of Triad.Eligibility requirements: To obtain a clearance, an individual must be at least 18 years of age; U.S. citizenship is required except in very limited circumstances. See DOE Order 472.2 (https://www.directives.doe.gov/directives-documents/400-series/0472.2-BOrder-chg1-pgchg) for additional information.HRP: This position is subject to the requirements of the DOE Human Reliability Program as specified in 10 Code of Federal Regulation, Part 712, §712.11. These requirements include on going drug and alcohol testing, as well as periodic medical and psychological evaluations.426.2: This position is subject to DOE Order 426.2, Personnel Selection, Training, and Qualification Requirements for DOE Nuclear Facilities, which establishes entry-level requirements to ensure candidates selected for specific positions can successfully perform the requirements of the job.New-Employment Drug Test: The Laboratory requires successful applicants to complete a new-employment drug test and maintains a substance abuse policy that includes random drug testing. Although New Mexico and other states have legalized the use of marijuana, use and possession of marijuana remain illegal under federal law. A positive drug test for marijuana will result in termination of employment, even if the use was pre-offer.Regular position: Term status Laboratory employees applying for regular-status positions are converted to regular status.Internal Applicants: Regular appointment employees who have served the required period of continuous service in their current position are eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the required period of continuous service, they may only apply for Laboratory jobs with the documented approval of their Division Leader. Please refer to Policy Policy P701 (https://int.lanl.gov/policy/documents/P701.pdf) for applicant eligibility requirements.Equal Opportunity: Los Alamos National Laboratory is an equal opportunity employer and supports a diverse and inclusive workforce. All employment practices are based on qualification and merit, without regard to race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation or preference, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by federal laws and regulations. The Laboratory is also committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request such an accommodation, please send an email to applyhelp@lanl.gov or call 1-505-665-4444 option 1.